1. Open the Duo 1800 kiosk's chassis and release the printer from the chassis by lifting the latch.
2. You can observe on the side of the printer an orange "PAPER" light which indicates that there is no more paper.
3. Remove the paper roll’s support.
4. Place the paper roll on the pivot and return it to its original position.
5. Lift the blue latch to unlock/release the printer cover.
6. Place the paper in the printer as shown above.
7. Close the printer cover over the paper roll.
8. To test the paper alignment in the printer, press the “FEED” button located on the site of the printer.
9. The printer will automatically feed the paper and then cut it, ready for use